PDF print-scale check
Check PDF page sizes locally, print a 100 mm test square, and calculate separate X/Y scale errors from ruler measurements. No PDF upload.
Your files never leave your device
PDF page sizes
Free and local. Your PDF is not uploaded or changed. File geometry cannot verify a physical printer.
Local file report
Page boxes and declared layers
Declared optional-content layers
Print a test sheet
Download a separate PDF with a 100 × 100 mm square. Choose matching paper, print at Actual size / 100%, and disable Fit and Shrink.
Use a physical ruler after printing. A screen preview and browser zoom are not measurements. Keep the printer settings the same for your own PDF.
Measure the printed square
Measure line centre to line centre: X horizontally, Y vertically. The target on both axes is 100 mm (about 3.937 in).
One PDF up to 10 MiB and 200 pages. A 15-second parsing deadline. Password-protected or invalid PDFs are refused. File geometry cannot verify a physical printer.
Check a PDF before printing
- Choose a PDF to read its page sizes, rotation, page boxes and declared layer names locally. Mixed sizes may need different paper or print settings.
- Download the A4 or Letter calibration sheet. Print it at Actual size / 100%, with Fit and Shrink disabled and matching paper selected.
- Measure the square horizontally (X) and vertically (Y), line centre to line centre. Enter both lengths to see each axis error. Recheck with the same settings you will use for your PDF.
Reading the results
PDF dimensions describe the file, not the printer. Paper names are approximate matches within 0.5 mm; compare the dimensions when precision matters. Mixed-size checks compare rotated visible dimensions within 0.01 mm, so portrait and landscape pages form different groups. Raw box coordinates are in PDF user-space units; reported millimetres include the page's UserUnit multiplier and rotation.
A measured length of 99 mm gives a scale of 99% and an error of −1%. At 101 mm the error is +1%. X and Y are calculated independently: (measured length ÷ 100 mm − 1) × 100. Small differences may come from the ruler or line width. Even equal results do not prove that every part of a page prints to scale.
This tool reads geometry and layer names only. It does not render your PDF, check artwork or fonts, evaluate layer print visibility, or certify a document as safe. It does not run embedded scripts or open links. These tools are open source (MIT).
For agent and batch reports, the separate API processes supplied PDFs on the server; it cannot verify a printer. Paid PDF inspection API (POST /v1/pdf/inspect).
Questions
Does this verify my printer or resize my PDF?
No. File dimensions do not prove physical output size. Print the separate test sheet and measure it with a ruler. The page never changes your PDF or printer settings. One test does not certify every page, paper path or printer.
Which PDF sizes and layers are reported?
MediaBox is the paper boundary; CropBox is the viewer area. TrimBox, BleedBox and ArtBox describe finishing areas. Missing boxes use PDF defaults and are labelled as defaults. Dimensions include UserUnit and rotation. The visible size is CropBox intersected with MediaBox. Up to 100 declared optional-content layer names are listed, with long names clipped at 160 characters. Their visibility and print rules are not evaluated.
What if X and Y have different scale errors?
Keep both results. A single percentage cannot correct unequal axis errors. Check driver scaling, paper selection and feed direction, then print again. No correction is applied or recommended automatically.
Does my PDF leave this device?
No. PDF parsing and ruler calculations run locally in this tab. No file, layer name or measurement is sent to Tanod or stored by this tool. Normal page assets load first. Clear removes the report and measurements; closing the tab releases page memory. A test sheet you download remains on your device. The separate paid API receives a file only if you choose to call it.